Cleveland Society for Coatings Technology

CCSMeetingsEVENTSBy LawsOfficersPhotos

Cleveland Coatings Society
SINK or SWIM May 12-13, 2009

v 5.12.09  Program | Registration | Exhibitors | Forms

FINAL ABSTRACTS (Word.doc) 10 MB large file

Tuesday May 12, 2009

7:00 AM

Registration opens and Breakfast outside auditorium

Time:   Place: Auditorium              

Speakers:                                         Moderator: Tim Chen

8:00 am to 8:30 am      

Dr. Alex Lubnin, Lubrizol Waterborne Raft Polymers

8:30 am to 9:00 am

Dr. Mark D. Soucek, The University of Akron, A New Class of Acrylated Alkyds

9:00  am to 9:30 am      

Dr. Jamie Dziczkowski, Reichhold Inc., Investigation of Dry Time Issues with Alkyd Emulsions

9:30  am to 9:45 am      

Break: Coffee, tea, and snacks outside auditorium

9:45  am to 10:15  am 

Dr. Jonathan Shaw, Cytec, Water-borne, Energy Curable Polyurethane Dispersions: Sprayable, High Performance Resins for Wood and Plastic,

10:15 am to  10:45 am   

Dr. Mohamad D. Shalati, Nuplex Resins, Waterborne Alkyd Dispersions

10:45 am to 11:15  am  

Christopher Howard, Evonik Tego Coatings Additives & Specialty Resins

Efficient Long-Term Defoaming in Low VOC Architectural Systems

11:30 am to 12:30 pm

Lunch: Hall C E    

12:30 pm to 3:30 pm

Showcase of Vendors in Hall A.

Cash Bar opens at 12:30pm finger foods at 2pm

John Du, BYK short course on additives in Room 335 12:30 to 3:30pm

Poster Session in Hall B.

3:45 pm to 4:45 pm

Key Note Speaker: George Pilcher, Consultant Coatings Industry, Akzo-Nobel Retired, Greener Coatings Industrial Overview

 

Wednesday May 13, 2009

7:00 am

Registration opens and Breakfast outside auditorium

Time:   Place: Auditorium              

Speakers:                                         Moderator: Tim Chen

8:00 am to 8:30 am

 

Duke Rao, Sherwin-Williams, Technology trends in polymer technologies for coatings applications

8:30 am to 9:00 am

John Du, BYK USA, Control Polymerization Mechanisms

9:00 am to 9:30 am

Dr. Eugene Sitzman, Ciba, Adhesives & Curing

9:30 am to 9:45 am

Break: Coffee, tea, and snacks outside auditorium

9:45 am to 11:00 am

Special Focus Speaker: Madeleine Harding, Sherwin-Williams, Regulatory and Compliance

11:00 am to 11:45 am

Panel discussion with experts. Topic: What is Green? And Q&A from attendees.

11:45 am to 12:45 pm

Lunch in Room 335

12:50 pm to 1:20 pm

Walking Tour of University of Akron Coatings & Polymer laboratory

1:30 pm to 2:00 pm

Paul Hoffman, Bayer Material Science LLC, Polyaspartic Coatings: The Key to greater productivity and lower VOC’s.

2:00 pm to 2:30 pm

Alan Boerke, Q-Panel Weathering Research Service, Outdoor Weathering Must Verify Accelerated Testing

2:30 pm to 3:00 pm

Michael Kelly, Allied PhotoChemical, Inc. Sustainable UV with Economic Case Studies

3:00 pm to 3:30 pm

Brian Doran, Eliokem Inc., An Amphoteric Binder System for Waterborne Stain Blocking Primers suitable for use at very low VOC levels

3:30 pm to 4:00 pm

Dr. Michael Clingerman, StrateNexus Technologies, LLC. Renewable Binders for Coatings

4:00 pm

Closing Ceremonies     Best Speaker awards

v 5.12.09  Program | Registration | Exhibitors | Forms

FINAL ABSTRACTS (Word.doc) 10 MB large file